Husqvarna K30 Air Cutter

CALL for Availability
Stock Code:
968374401
The Husqvarana K30 is a market leading air saw. Powerful and effective, grab it now while stock lasts!

The K30 Husqvarna Air cut off saw deliver powerful and reliable cutting of a range of construction materials. Air power is perfect for sensitive or confined environments where exhaust emissions can be of concern.

The K30 from Husqvarna handles up to a standard 350mm [14"] diamond blade or abrasive blade. It features a reversible cutting arm that allows close cutting to walls and other obstacles from either side of the machine. The K30 air cutter saw also features DEX™. A unique water saving wet cutting kit that keeps dust to a minimum

  • DEX
  • Air motor
  • Automatic mist lubrication
  • Replaceable arbor bushing
  • Poly-V belt
  • Powerful, reliable air-powered industrial cutters, ideal for use indoors or outdoors.
  • No emissions of oils or exhausts, so it's perfect for sensitive environments.
  • The cutters have a long, slim body, good weight distribution and fine sideways balance between the handles.
  • Automatic mist lubrication.
  • Reversible cutting arm.
  • The Poly-V belt provides better transmission of power, less frequent re-tensioning and greatly extended product life.
  • DEX – water-saving wet cutting kit for efficient dust management.
  • For working both indoor and outdoor

    For working both indoor and outdoor

    An air-powered Husqvarna cutter is obviously a natural alternative for working indoors, but it is just as viable outdoors in places where the air-change rate is low, such as in pipeline trenches, in deep foundation sites and on marine docks.

  • Compressed air

    Compressed air

    Compressed air can transfer generous amounts of power, and the blade can withstand lots of load, without the machine losing capacity. The cutter can also be made extra manoeuvrable and lightweight.

  • Wet cutting kit

    Wet cutting kit

    All our cutters except the K 3000 Electric feature our robust new wet cutting kit, with low water usage.

  • Reversible cutting arm

    Reversible cutting arm

    The cutting arm is reversible which lets you cut closer to walls or the ground. The drive belt has a fully sealed trans-mission. This keeps out cutting dust etc, reducing wear.

Applications

  • Blocks, curbstones and pavers
  • Cast concrete
  • Floors and walls

Specs

Engine
Engine Air
Air flow min: 2 m³/min max: 2.4 m³/min / min: 70 cfm max: 85 cfm
Air Pressure 7 bar / 7 kp/cm²
Power output 2.3 kW / 3.1 hp(I)
Cutting equipment
Blade diameter 300 mm / 12 inch
Max cutting depth 100 mm / 4 inch
Dimensions
Weight (excl. cutting equipment) 8.7 kg / 21.6 lbs
Vibration
Vibrations front handle 7.2 m/s²
Vibrations rear handle 3.8 m/s²
Daily Vibration Exposure (A8) 2.55 m/s²
Daily Vibration Time (Time factor) 1 h
Daily Vibration (Aeqv) 7.2 m/s²
Sound and noise
Sound level 89 dB(A)
Sound power level, guaranteed (LWA) 106 dB(A)

  • Optimal
  • Good
  • Acceptable
Husqvarna S 1435 Diagrip™ Husqvarna S 1445 Diagrip™ Husqvarna S 1465 Diagrip™ Husqvarna S 1485 Diagrip™ Husqvarna VN 45 Husqvarna VN 65 Husqvarna VN 85

Model

S 1435

S 1445

S 1465

S 1485

VN 45

VN 65

VN 85

Materials
Marble
Granite
Brick
Cured concrete
Roof tile
Reinforced concrete
Hard tiles - porcellanato
Ceramic tiles
Cured concrete hard
Cured concrete medium
Cured concrete soft
Abrasive material
Asphalt
Green concrete (abrasive) soft
Asphalt hard
Asphalt soft
Iron
There are no file attachments for this product.
Write Your Own Review
You're reviewing:Husqvarna K30 Air Cutter
Your Rating