Husqvarna CURE (L) 20L
In stock
CURE (L) is a lithium silicate and is ideal for dense surfaces or outdoor projects. Can also be used as an additional lip coat after the initial CURE application, to optimise the densification effect throughout the grinding process.
All Husqvarna densifiers provides a solution capable of increasing the abrasion- and scratch resistance of concrete, while adding basic stain resistance, limiting efflorescence and dustproofing your surface. It penetrates deep into the surface and react with calcium hydroxide present in the concrete to form calcium silicate hydrate (CSH), which progressively hydrate to a glass-like crystalline structure. The silica blend improves the density and hardness of concrete and reduces the penetration of liquids and dirt.
Application
Husqvarna CURE (L) can be used on all calcareous floor coverings, such as grinded/polished and troweled concrete floors, cementitious screeds, terrazzo, terrazzo tiles, etc. Applications are e.g. industrial floors, market halls, logistic centers, supermarkets and in private homes, indoor and outdoor.
Processing
The surface to be treated must be dry and free from impurities. To ascertain the consumption make a separate sample area of the same surface. Apply after 100 grit metal bond diamond pads, i.e. the last metal step before shifting into resin tools. Note: Husqvarna CURE (L) might very well be applied directly after the grouting process to leave everything to harden simultaneously. Use a micro fiber mop to facilitate a homogenous and efficient coverage and treatment. Keep surface moist for 20 minutes and then remove surplus material.
Drying time will be around 1-2 hours. If the product is applied between grinding steps, the product should be left to harden for approx. 8 hrs. Any sequential grinding or troweling is normally continued the next day.
Note: Adjacent surfaces must be protected against splashes. Remove surplus material film before drying up. Clean equipment with water.
Health & Safety
Husqvarna CURE (L) is harmless to health after curing. A good ventilation should be provided during and after the application. Safety data sheet available at request. Ingredients: Silicic acid, lithium salt.
Processing temperature
Avoid direct solar radiation during processing. The surface temperature should be between 5°C and 35°C (40°F to 95°F). Floor heating should be turned off. Avoid direct moisture until the treatment is totally dry.
Drying time
The drying time (walkable) is between 1-2 hours. According to ambient temperature and humidity, drying time can vary. If an additional impregnation/sealer is to be applied directly after Husqvarna CURE (L) (e.g Husqvarna PREMIUM GUARD) the waiting time is approx. 12 – 24 hours.
Consumption rate
For grinded/polished surface: approx. 300 sqft/G Storage & Shelf-Life
Store in cool, dry place, in closed container. Protect from frost. Avoid direct sunlight. Storage temperature should be between 5°C and 30°C (40°F to 90°F). Shelf-life is 18 months from manufacturing date in unopened canisters. Manufacturing date is stuck onto the pail with the Julian date Code with a sticker as in YYDDD.
Opened cans should be worked up as soon as possible.
Environmental Protection
The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment. Dispose of contents/container in accordance with local/regional/ national/international regulations. Completely emptied packages can be recycled.
Accessories
Are you sure you would like to remove this item from the shopping cart?
This item is a part of the approved quote. Removing it will remove all quote items from the cart.