K FORM K85 Screed Rail
In stock
K-FORM UPVC Screed Railing provides the construction industry with an economical, efficient and environmentally friendly alternative to steel and timber formwork.
Each length is 2400mm long. Designed for pours of 100 mm-140 mm thick concrete (when used in conjunction with K25 Riser).
K-FORM UPVC Screed Railing (2400mm per length) provides the construction industry with an economical, efficient and environmentally friendly alternative to steel and timber formwork. This leave in place plastic formwork system is incredibly easy to use. Simply place 15mm of bedding motor & allow to set to achieve 100mm cover. K Form 85mm includes 25mm dowel bar slots to allow adjacent slabs to be tied together. The 25mm Top extender can be utilised to increase the cover if required. Designed for pours of 100 mm-140 mm thick concrete (when used in conjunction with K25 Riser).
Designed for pours of 100 mm-140 mm thick concrete (when used in conjunction with K25 Riser)
Enables adjoining bays to be poured consecutively
Pre-drilled holes in base for anchoring with mortar
Pre-drilled holes in vertical face for locating dowel bars
Once concrete is poured, K-FORM is left in place; no need to remove and clean
Separate wear strip can be removed once concrete is set to allow joint sealing
This leave in place plastic formwork system is incredibly easy to use. Simply place 15mm of bedding mortar & amp; allow to set to achieve 150mm cover. K Form 135mm includes 25mm dowel bar slots to allow adjacent slabs to be tied together. The 25mm Top extender can be utilised to increase the cover if required. The removable top strip is left in place during slab construction and extracted after final finishing to allow application of a joint sealant for slab expansion.