Flat Wire Texture Brooms

In stock

We supply two widths of flat wire texturing brooms: 36" and 48" with a gap size of 3/4" or 5/8" between the 5" long wires. These concrete texturing brushes have an adjustable handle to allow for the correct pressure to be applied.

A popular tool to create non-skid surfaces on highways, bridges, airport runways, ramps, driveways, and cattle pens. The Flat Wire Texture Broom produces a uniform rough groove surface on roads and bridges for maximum traction and to keep water flowing off the road.

The Flat wire texture broom is also highly effective at reducing noise pollution from vehicle tires when used in direction of traffic flow. The snap-out, snap-in tines are blue spring steel. The thick tine is stiff enough to create a groove, but provides a slight "give" for durability.

Each Flat Wire Texture Broom complete with a 35mm diameter handle which is 6ft in length.

Grouped product items
Product Name Price Stock Code
48" Flat Wire Texture Broom - 3/4" Spacing CC198-3/4
36" Flat Wire Texture Broom - 3/4" Spacing CC196-3/4
36" Flat Wire Texture Broom - 5/8" Spacing CC196-5/8
Flat Wire Texture Brooms

Choose from a 36'" or 46" wide broom head for the required application. This product comes with; the broom head, adapter fitting and a 35mm diameter 6ft long handle. If you require a greater reach Snap Handles and Snap Adapters are available to purchase on this website. See related Products.

There are no file attachments for this product.
Write Your Own Review
You're reviewing:Flat Wire Texture Brooms
Your Rating