Husqvarna CURE +

Application  
Husqvarna CURE+ can be used on all calcareous floor coverings, such as grinded/polished and troweled concrete floors, cementitious screeds, terrazzo, terrazzo tiles, etc. Applications are e.g. industrial floors, market halls, logistic centers, supermarkets and in private homes, indoor and outdoor.

Processing  
The surface to be treated must be dry and free from impurities. To ascertain the consumption make a separate sample area of the same surface. Apply after 100 grit metal bond diamond pads, i.e. the last metal step before shifting into resin tools. Note: Husqvarna CURE+ might very well be applied directly after the grouting process to leave everything to harden simultaneously. Use a micro fiber mop to facilitate a homogenous and efficient coverage and treatment. Keep surface moist for 20 minutes and then remove surplus material.
 
Drying time will be around 1-2 hours. If the product is applied between grinding steps, the product  should be left to harden for approx. 8 hrs. Any sequential grinding or troweling is normally continued the next day.

To optimize the result we also recommend applying an additional thin lip-coat of the densifier in front of the grinder when running the first two sequential resin steps. This will aid in keeping the tools sharp and also filling in the small micropores that the initial rough resin steps might be generating.

Note: Adjacent surfaces must be protected against splashes. Remove surplus material film before drying up. Clean equipment with water. 

Processing temperature  
Avoid direct solar radiation during processing. The surface temperature should be between 5°C and 35°C (40 – 100 F). Floor heating should be turned off. Avoid direct moisture until the treatment is totally dry.

Drying time  
The drying time (walkable) is between 1-2 hours. According to ambient temperature and humidity, drying time can vary. If an additional impregnation/sealer is to be applied directly after Husqvarna CURE+ (e.g Husqvarna PREMIUM GUARD SB) the waiting time is approx. 12 – 24 hours.

Consumption rate
Depending on the absorption, following values are to be assumed. For grinded/polished surface (application normally at grit 100): approx. 10m² / liter.  

Storage & Self Life 
Store in cool, dry place, in closed canister. Protect from frost. Storage temperature 5°-30° C. Shelf life in unopened canister is 18 months from manufacturing date. Expiry date is written on the label. Opened cans should be worked up as soon as possible. 

Environmental Protection  
Do not empty into drains. WGK 1 (low water endangering). Waste codes/waste designations according to EWC/AVV. Waste code product: 06 02 05 Other bases. Waste code packaging: 15 01 10 packaging containing residues of or contaminated by dangerous substances. Dispose of waste according to applicable legislation. Completely emptied packages can be recycled.

Health & Safety 
Husqvarna CURE+ is harmless to health after curing.  A good ventilation should be provided during and after the application. Observance of special security measures if the product will be use in a spraying application. Safety data sheet available at request.  Ingredients: Silicic acid, lithium salt and potassium methylsilanetriolate.