Jackjaw Stake Extractors
In stock
JackJaw stake extractors pull stakes straight up out of the ground without bending them or breaking the fresh concrete, even when the stake is flush with the top of the form.
Contractors can now drive the top of the stakes below the top of the form, allowing them to finish the concrete faster by screwing over the top of the forms. With the low grip height of the JackJaw® stake extractor, the contractor can easily pull the stakes, even when driven below the top of the form. This tremendous leverage prevents operator back injuries.
Available in two sizes. Scroll down to learn more.
The JackJaw form pin and stake extractors make an easy task of pulling concrete form pins and stakes after your concrete is poured. With a single pump of the handle, most pins will break loose.
The ergonomic design easily grabs the stake for a second pull, if needed. It is designed to remove round ? inches and 7/8 inches nail stakes, "T" fence stakes and string line stakes.
Available in Two sizes 14" and 29" gives the user a choice. The JackJaw is available in two sizes. The Standard Model, is 14" tall. If you prefer not to bend over, order the Extended Model, which is 29" tall. The gripping jaws of the JackJaw? extractor are made from case hardened AR400 steel that will last for thousands of pulls. When it is necessary, they are easily replaced in the field using common tools to install the new jaws.
Specifications
Handle Force: 10 lbs
Gripping Force: 2100 lbs
Breakout Force: 900 lbs
Handle Force: 50 lbs
Gripping Force: 1050 lbs
Breakout Force: 450 lbs
Handle Force: 200 lbs
Gripping Force: 420 lbs
Breakout Force:1800 lbs
The JackJaw®100 stake puller easily pulls ¾” and 7/8” concrete form stakes used in concrete applications, and string line stakes making it an excellent tool for all concrete contractors to carry. This JackJaw® stake puller is the compact model (14” tall) that fits behind the seat of the truck. JackJaw® stake extractors pull stakes straight up out of the ground without bending them or breaking the fresh concrete, even when the stake is flush with the top of the form.
A 50lb push on the handle generates a massive 1050lbs of gripping force and a 450lb upward breakout force on the stake.
The JackJaw®200 concrete stake puller easily pulls ¾” and 7/8” form stakes used in concrete applications, “T” posts, and string line stakes. This taller model (29” tall) allows you to pull stakes without bending over. JackJaw® concrete stake pullers pull stakes straight up out of the ground without bending them or breaking the fresh concrete, even when the stake is flush with the top of the form.
A 50lb push on the handle generates a massive 1050lbs of gripping force and a 450lb upward breakout force on the stake.
Made to last
The JackJaw stake extractors are made from heavy gauge steel plate and tubing and can withstand everyday job site use. Two holes in the 4" by 8" base plate allow you to attach it to a board for an even wider base for working in soft conditions. No paint to chip. JackJaw? has a clear zinc plating for lasting durability that will resist corrosion.
