Grinder Kit LDE 16-8 125 R, Kit E-Jet
In stock
Grinder Kit LDE 16-8 125 R, Kit E-Jet. This hand held grinder kit comes with the Kit E-jet grinding disc. The grinder has a variable speed dial and can be us connected to a safety vacuum cleaner for dust-free edge grinding, 125 mm.
Grinding disc for abrasive materials. For removal of formwork transitions and concrete runs from freshly concreted surfaces, mineral adhesives, screeds, plaster, mortar, abrasive lime sand brick, sandstone, chamotte, asphalt.
Suggested replacement disk: Diamond Grinding Boomerang Cup Wheel 125mm Universal Floors. See related items below.
Power consumption: 1600 W
Power output: 950 W
Voltage: 230 V
Frequency: 50/60 Hz
Disc diameter: 125 mm
No-load speed: 4500 - 7800 rpm
Tool holder, renovation grinder: M14
Cable length: 4.0 m
Weight: 3.1 kg
Standard Kit Contents
1 Screed-Jet diamond grinding disc (359394)
1 Extraction hood with pivoting edge segment (498475)
3 Cable clip (252188)
1 Hexagon socket wrench (102229)
1 Face pin spanner (392537)
1 Carrying case L-BOXX® (414093)
1 Case insert (414131)
1 Bail handle
Specifications
Microprocessor control with soft start, restart protection after power failure,
temperature monitoring, overload protection, CDC-electronic feedback control.
Reliable 1600 watt high-performance motor with sufficient power reserves
Dust extraction: prevents dust nuisance, reduces disc wear, keeps the concrete pores open for the new coating.
Anti-Kickback - this shuts down the motor on the disc being blocked.
Guard with pivoting segment to allow grinding right up to the wall.
Height-adjustable to the disc height and for optimum dust extraction.
With steplessly adjustable, vibration-proof, ergonomic bail handle, for optimum handling and machine control.
For fast hose connection. FLEX clip connection for Ø 32 mm snap connection included in the standard equipment.
Recessed spindle lock, to avoid unintentional activation.
Variable speed for dust minimization in case of tool protrusion, as well as
better control of finer work with less pressure, e.g. on edges, and during the
final smoothing of surfaces.
Ideally suited for processing walls, ceilings and floors. Efficient and economic working thanks to optimum coordination between machine and sanding disc.
