Slide Free Delivery on Brick Tools Over £50 exVat Free Delivery on Brick Tools Over £50 exVat Slide Timed & Dedicated Delivery Services Slide Innovative Market Leading Products
Excl. Tax £325.00
Incl. Tax £390.00

Adotuf Lithium

In stock
Stock Code:
AL/25

Lithium Silicate Solution for Case Hardening & Polishing Concrete Floors

ADOTUF Lithium is a non-hazardous and environmentally friendly solution of lithium silicate. It is designed for densifying, dust proofing and sealing concrete floors, and is especially suitable for those which are being highly polished afterwards.

Available in other volumes, please enquire if you require more than our standard 25 litre as seen here stock code: AL/25

This penetrating lithium silicate solution chemically reacts with the concrete to produce insoluble calcium silicate hydrate within the concrete pores.

Treated surfaces resist damage from water, oil and damage by surface abrasion. This increased surface hardness significantly reduces surface dusting and simplifies cleaning.

ADOTUF Lithium also reduces application time and costs of mechanical polishing operations to help create a highly glossy concrete floor.

Surface Preparation

Cement bound floors must be sound, clean, dry and free from oils, grease, fats, etc. New floors will require at least 7-10 days to thoroughly dry out before treatment. Pores in the surface should be opened up by wire brushing. Remove dust and loose particles with a soft broom. Test surface absorbency with a light water spray. If surfaces designated for treatment do not wet uniformly then the surface must be chemically or mechanically cleaned before commencing treatment.

Application

ADOTUF Lithium is supplied in a ready to use form. Apply uniformly with a low pressure sprayer onto floor surface. Using soft cloth, soft bristle broom or roller spread ADOTUF Lithium evenly over floor. Avoid formation of puddles. Allow floor to dry for at least 1 hour. A second application may be required for more pourous surfaces. Repeat the process as above and squeegee away any excess material remaining after 1 hour. For immediate enhanced shine, buff or burnish the dry concrete in both directions using an orbital floor machine or burnisher equipped with a suitable polishing pad.   

Write Your Own Review
You're reviewing:Adotuf Lithium
Your Rating
We found other products you might like!
You might be interested in