Crimp Jaw Stake Extractor

Description

The CrimpJaw form pin and stake extractors make an easy task of pulling concrete form pins and stakes after your concrete is poured. With a single pump of the handle, most pins will break loose. The ergonomic design easily grabs the stake for a second pull, if needed. It is designed to remove round ¾ inches and 7/8 inches nail stakes, "T" fence stakes and string line stakes. Available in Two sizes 14" and 29" gives the user a choice. The CrimpJaw is available in two sizes. The Standard Model, is 14" tall. If you prefer not to bend over, order the Extended Model, which is 29" tall. The gripping jaws of the JackJaw® extractor are made from case hardened AR400 steel that will last for thousands of pulls. When it is necessary, they are easily replaced in the field using common tools to install the new jaws.

Specs

Both units multiply force by 9 times. A 50 pound down force on the handle generates a massive 1050 pounds of gripping force and 450 pound upward breakout force on the stake. Need more force? Just push a little harder to get even the toughest pins or stakes out in one stroke. See table below: